Just did couple hundred 223,s what a sweet system, thanks again.  R.F.N.

The package arrived, today. You must have had it in the mail before I ordered. You are amazing sir. As is your product.  – Mark – Houston, TX

Your system works great! I annealed 500 cases of .308 with no issues whatsoever.  Now I’m chopping .223 brass for reforming to 300 blackout and will place an order for your #4 holder.  Kevin

Received my Anneal-Rite yesterday & annealed some 5.56 cases. Decided this wasn’t above my (limited) abilities, today did 278 more.  I’d recommend the Anneal-Rite system to ANYONE!  It’s simple to operate, all you really need to do is pay attention.  I wish I had this 30 years ago.  Thanks, you can be sure I’ll send everyone your way that’s interested in annealing;-}  Mike

Thanks a lot, I processed a couple hundred .243 and fifty .338 Lapua brass. The simplicity of your system is great! Now for some 22-250 brass.  Thanks! – Ben

Received the Anneal-Rite goodies yesterday & read the instructions.  I put the 750 F. Tempilaq inside each case neck & a little 450 on the outside at the base of .270 Win. cases.  Annealed went exactly as you described & was annealing a case in 3-4 seconds.  Many thanks an annealer that works well, quickly & doesn’t break the bank.  David Fisher

Thanks for the simple, inexpensive, efficient Anneal-Rite machine.  I just annealed 200 .300 BLK brass converted from .223 REM.  The conversion process work hardens the formed cases, annealing is an easy correction.  The ease of setting up and annealing the brass was ideal, I annealed 200 pieces in about 40 minutes.  Bill   Duncanville, Texas

Just got the Anneal-Rite, works EXACTLY as in the video with no tricks.  I smoothly annealed a .308 case every 3 to 4 sec. in the flame, reloading these & the neck tension is more consistent.  I also annealed some .223 cases.  I was a little nervous about annealing them being small. With the 750 deg. Tempilaq in the neck and 450 deg. on the side, I annealed all without affecting the head.  I considered annealing for several months, but never felt comfortable until I saw the Anneal-Rite, it is superb!    Randy Medford,  Fort Wayne, IN

Have hesitated to anneal for several years.  Reading up on the process, it seemed that going by the color of the brass at heating was very subjective.  I never hesitated to buy your system when I read about the Tempilaq liquid.  The brass handling setup is quick and easy.  Many Kudos for an accurate and reasonably priced system.

David

Byron, IL

I’ve received, and used the Anneal-Rite I recently purchased after viewing your YouTube instructional.  Things went so well, and precisely as described, that I just wanted to say thanks, both for the good design of your equipment, but also, for its ease of use.  Just like you did in the video, I bought both the appropriate (750 degree) Tempilaq, and the lower temp (450 degree) Tempilaq to use to confirm my timing for your process.  I followed your instructions, using your equipment, and indeed, the neck shoulder Tempilaq turned the appropriate color on cue, and the lower temp Tempilaq, painted on the lower body of test brass, did not turn from its original color, indicating the annealing was localized to the right area of the brass. Perfect.  I was worried this would be a difficult, and imprecise process, and thanks to the design of your equipment, I found it was simple and straightforward.  I know I can get consistent results with your process.  I love it when a plan comes together.   Sincere Thanks,  Jim from Grand Junction, Colorado

ULTIMATE CARTRIDGE CHECK SYSTEM  TESTIMONIALS

I recently received your Ultimate Cartridge Check System that I read about in Handloader Magazine.  I am very pleased with the purchase of your product.  It exceeds both the article’s review and my expectations.  I have used a number different concentricity gauges over the years in the manufacturing of custom ammunition.  Your product is considerably better than what I have been using and superior to any other product, of its kind, presently on the market.  The Ultimate Cartridge Check System is of industrial quality and seemingly built to last a life time of continual use. Truly a very durable measuring device.  I appreciate its versatility as well as the speed and ease of use with its digital indicator.  Thank you for making available such a quality measuring instrument.    Sincerely, Stephen Holtz Owner / Operator American Custom Cartridge

The setup is Great, and the Ultimate cartridge Check System with indicator is slick. Michael C.