Cartridge case holders are indispensable tools when it comes to the annealing process of brass casings. During annealing, which involves heating and cooling the brass to restore its flexibility and prolong its lifespan, cartridge case holders serve as a secure and reliable platform for holding the cases in place. These holders ensure that the cases remain stable and upright during the heating and quenching stages, preventing them from tipping or falling over. By keeping the cases properly positioned, cartridge case holders allow for consistent heat distribution and uniform cooling, resulting in precise and effective annealing.
Please use the list below for the most used sizes, or click the button below for a full list.
Click any link below to go to that item.
#1 Holder for .308 Win. .243 Win., .280 Rem. 6.5mm Creedmoor, 7mm X 57 & cases with head not over .480” diameter and at least 1.4” long, POSTPAID! |
|
#2 Holder for .300 Win. Mag. .30-30 & all cases not over .542” diameter and at least 1.75” long, POSTPAID! |
|
#3 Holder for .223 Rem. .224 Valkyrie & all cases not over .417” diameter and at least 1.25” long, POSTPAID! |
|
#4 Holder for .300 AAC Blackout, .22 Hornet & all cases not over .417” diameter and at least 1.00” long, POSTPAID! |
|
#5 Cartridge Case Holder for.38 Special, .357 Mag. & cases not over .480” diameter and at least 1.00” long, POSTPAID!
|
|
#6 Cartridge Case Holder for .44 Mag, .45 Colt, .458 Socom & all cases not over .543” diameter and at least 1.00” long, POSTPAID! |
|
#7 Cartridge Case Holder for .45 ACP, .40 S&W & all cases not over .480” diameter and at least .800” long, POSTPAID! |
|
#8 Cartridge Case Holder for .300 WSM, .300 Rem. SAUM, .300 RUM & all cases not over .573” diameter and at least 1.500” long, POSTPAID! |
|
#9 Cartridge Case Holder for .338 Lapua, .45-70, .460 W.M. & all cases not over .605” diameter and at least 1.750” long, POSTPAID! |
|
#10 Cartridge Case Holder for .50 BMG, .600 N.E. & all cases not over .823” diameter and at least 1.750” long. POSTPAID! |
|
#11 Cartridge Case Holder for .41 Swiss & all cases not over .636” diameter and at least 1.225” long, POSTPAID! |
|
#12 Cartridge Case Holder for .577 Snider & all cases not over .746" diameter and at least 1.700” long, POSTPAID! |
|
20mm Vulcan Cannon Case holder, made from 1.5" square aluminum bar allowing the two large holes required to accommodate this case. A custom wood turning knob is furnished with each holder, pinned in place. This #13 holder is longer than standard requiring additional manufacturing time. In stock available for immediate shipment. |
|
#14 Cartridge Case Holder for 9mm Luger (9 X 19) & 9 X 23 Win. Mag. As these cases are very short we sell this as a BUNDLE DEAL which includes 1 ~ 2 oz bottle of 450 F. Tempilaq in order to insure the case head doesn't anneal, POSTPAID! |
|
BUNDLE DEAL; Cartridge Case Holders 1, 2 & 3. NOTE; if you want any other combination of 3 holders numbers 1, 2, 3, 4, 5, 6, 7, or 14 this price applies, you must call 479-629-5566 to order other combinations, POSTPAID! |
|
BUNDLE DEAL order 12 Cartridge Standard Case Holders from our list and save (ALL EXCEPT #13). NOTE; specify holders wanted by SKU number in Order Notes, POST PAID! |
