Description
Two Bernz0matic pencil flame propane torches. These are the perfect choice for precision case neck annealing, POSTPAID!
Two Bernz0matic pencil flame propane torches
$47.86
Two Bernz0matic pencil flame propane torches. These are the perfect choice for precision case neck annealing, POSTPAID!
Related products
-
Sinclair # 749-009-211 .338 bullet comparator
$19.95 Add to cartSinclair # 749-009-211 .338 bullet comparator
.338 Sinclair 749-009-211 bullet comparator. This precision fixture has a large stable base affording precision measurement. Use with bullets only or loaded ammunition. Precision bored with a throat reamer to accurately duplicate a rifle throat. Carefully drop a bullet or loaded round into the comparator then place on the granite surface of our Ultimate Cartridge Check System. By using this method accurate bullet ogive comparisons are made avoiding pressure variations using a caliper. Bullets shown not included, POSTPAID!
$19.95 -
.338 Case Spinner, 7th from L. for .338 cases from 1.662″ to 2.750″ long.
$19.95 Add to cart.338 Case Spinner, 7th from L. for .338 cases from 1.662″ to 2.750″ long.
Super convenient to spin clean entire exterior of your .338 cases including the base. Works works with cases from 1.662″ to 2.750″ long. Most use 0000 steel wool (not included). While a case is spinning its easy to clean the primer pocket with an appropriate tool made for this purpose. Chucked the spinner in an electric hand drill, or drill press, turn at 400 to 500 rpm. DO NOT WRAP POLISHING MEDIA AROUND YOUR HAND, DO NOT USE GLOVES, GRIP CASES WITH THE POLISHING MEDIA NOT THE BARE HAND. POSTPAID!
$19.95 -
.45 Cal. spinner on far right for cases from 2.300″ to 2.714″ long
$19.95 Add to cart.45 Cal. spinner on far right for cases from 2.300″ to 2.714″ long
Super convenient to spin clean entire exterior of your .45 cases including the base. Works with cases from 2.300″ to 2.714″ long. Most use 0000 steel wool (not included). While a case is spinning its easy to clean the primer pocket with an appropriate tool made for this purpose. Chucked the spinner in an electric hand drill, or drill press, turn at 400 to 500 rpm. DO NOT WRAP POLISHING MEDIA AROUND YOUR HAND, DO NOT USE GLOVES, GRIP CASES WITH THE POLISHING MEDIA NOT THE BARE HAND. POSTPAID!
$19.95 -
FOUR .500″ hard chrome plated replacement steel ball
$9.95 Add to cartFOUR .500″ hard chrome plated replacement steel ball
Four replacement hard chrome plated .500” steel balls for our Ultimate Cartridge Check System, POSTPAID!
$9.95
Reviews
There are no reviews yet.